Safety shoes need to be properly used and maintained in order to ensure that the performance should be effective and to maintain the user's foot health, so the following should pay more attention to:First of all: regular cleaning safety shoes, which should pay attention to is not to use solvent as a detergent.Second: regular cleaning soles, to avoid accumulation of dirt, especially insulated safety shoes, soles of the non-conductive or anti-static effect will be affected by the impact of the soles of the shoe, and even endanger the safety of life.Again: do not arbitrarily modify the structure of safety shoes. Because the formal safety of the structure of the boot is designed by the designer to protect the personal safety, free transformation may affect the safety shoes safety index.Finally: Safety shoes should be stored in a cool, dry and well-ventilated place. Safety shoes are people to protect personal safety tools, in the use and maintenance must be carefully implemented.
Safety shoes production process points: molding, injection, cemented, seam. Injection of safety shoes light, soles and vamps high viscosity, outsole is usually made of polyurethane materials, wear, waterproof. Cement shoes is a long history of the production of a traditional process, the general soles of rubber and other materials. Different production methods are distinguished:• The sole can be glued (cemented). In this process the upper and the sole are glued together. In this case the sole is fabricated first, with a separate machine. This is the easiest method and it can be applied to all sorts of soles.• Another process is the injection of polyurethane, in which the sole of polyurethane is created and directly attached to the upper. The upper is placed into a mold (normally made of aluminum or Teflon), then polyurethane is injected into the mold, and when it cools it becomes solid and sticks to the upper. This process fixes together the upper and the sole very firmly.• The soles can also be sewn, but this methods is being used less and less, for production efficiency reasons. AKA Goodyear welted or seam."Goodyear welt construction" involves stitching a welt to the upper and a strip of preformed canvas like a "rib" that runs all around and bottom (known as "gemming") cemented to the insole of a shoe as an attach-point for the out sole or midsole (depending on the Goodyear welt variant). The space enclosed by the welt is then filled with cork or some other filler material (usually either porous or perforated, for breathability), and the outsole is both cemented and stitched to the welt. Shoes with other types of construction may also have welts.For the process equipment, here focuses on the injection of safety shoes production equipment. International is currently recognized as the most advanced safety shoe production equipment Germany's Desma DESMA even the injection shoe machine and the Italian reputation even to help injection shoe machine, the whole process by the computer control, which Dresdner DESMA and BASF Technology Materials Of the ultra-low density foam technology marriage, so that DESMA equipment, the amount of technology to meet the global similar equipment can not achieve a new height, buffer performance, energy absorption, seismic performance, adhesive fastness always walk in the forefront of technology.
ROCKROOSTER has many years of experience in safety protection to ensure that you use our products in any dangerous working environment can be multi-directional protection. The following are important features of safety shoes:
Anti-smashing labor insurance shoes and steel head labor insurance shoes is the same type, that is, to protect the toe safe labor insurance shoes.Safety labor insurance shoes and labor insurance shoes are foot safety protection, but also the same meaning. It has a lot of types, such as the protection of toes, puncture, insulation, acid and so on.Safe labor insurance shoes use specificationsOil and plastic shoes for the area of oil or oil splashing place; waterproof labor insurance shoes for the area of water or splashing of the workplace; cold labor insurance shoes for low-temperature operation of the foot protection, so as to avoid frostbite.Anti-piercing labor insurance shoes for foot protection, to prevent a variety of sharp objects stabbed.The main function of anti-smashing labor protection is to prevent the fall of the foot injury. The main function of steelmaking labor insurance shoes is anti-burning, cutting, should be able to withstand a certain static pressure and resistance to a certain temperature, non-flammable. This type of labor insurance shoes for smelting, furnace, cast iron and so on.In addition to the above, there are some special labor insurance shoes supporting the use of such as canvas, asbestos, aluminum material, such as labor insurance cover.The selection of labor insurance shoes should be based on the hazardous nature of the work environment and the degree of harm. Labor insurance shoes should have product certification and product brochures. Should be used before the use of the conditions to read the instructions, use the method to be correct. Special protective labor insurance shoes, after use should be checked and kept clean, stored in a non-polluting dry groundThe choice and use of labor insurance shoes(1) labor insurance shoes in addition to the operating conditions should be selected according to the appropriate type, but also should be fit, wear to make people feel comfortable, it is very important to carefully select the appropriate labor insurance shoes.(2) protection should be non-slip design, not only to protect people's feet from harm, but also to prevent the operator was slipping caused by the accident.(3) a variety of different performance of labor insurance shoes, to achieve their own protective performance of the technical indicators, such as the toes are not injured, the soles of the feet are not stabbed, insulated and other requirements.(4) the use of labor insurance shoes to be carefully checked or tested in electrical and acid-base operations, damaged and cracked labor insurance shoes are dangerous.(5) labor insurance shoes to be properly kept after use, rubber labor insurance shoes with water or disinfectant after use to wash and dry to extend the service life
To dry wet boots remove footbed stuff with newspaper place in a warm position away from direct sun or direct radiated heat.
If boots are stored in dark / humid conditions for a prolonged period the sole compound can deteriorate. It is better to wear your boots regularly.
Clean the dirt, mud or contaminates off after each shift with soft brush or damp cloth. Leave your boots out to dry after cleaning them in a warm place. Avoid any harsh or direct heat on them, as it will damage and may ruin the leather. You need to let them breathe. Avoid storing them in a plastic bag and instead leave them out in the open somewhere safe, like on a shelf.
Do not store in cupboard or dark/humid conditions. When you are not wearing your ROCKROOSTER boots (if this happens) try and do the below:- Store your boots in a cool dry spot- If your boots are stored away for extended periods how about showing them some love by taking them for a walk twice a month to keep them fit and healthy
For Nubuck or Suede leathers, clean by brushing off loose dirt using a Suede brush (suede brushes have fine brass bristles).
Rockrooster provides extra width without increasing the length of the boot, also with half sizes.
All ROCKROOSTER boots are based on the AUS sizing system. Please find size conversion chart below:
A person other than a worker must wear the personal protective equipment at the workplace in accordance with any information, training or reasonable instruction provided by their person conducting a business or undertaking.
When choosing the right personal protective equipment (PPE) for the job the selection processes must include consultation with users and their representatives and should also include: · a detailed evaluation of the risk and performance requirements for the PPE · compatibility of PPE items where more than one type of PPE is required (for example ear muffs with a hard hat) · consultation with the supplier to ensure PPE is suitable for the work and workplace conditions, and · preference for PPE that complies with the relevant Australian Standard or equivalent standard.
The standard of personal protective equipment used at a workplace must be: · selected to minimise risk to health and safety · suitable for the nature of the work and any hazard associated with the work · a suitable size and fit and reasonably comfortable for the person wearing it · maintained, repaired or replaced so it continues to minimise the worker’s health and safety risk, and · used or worn by the worker, so far as is reasonably practicable.